An extruded polyethylene mesh with an oscillated structure designed to increase traction and improve slip resistance by up to 97% compared to standard straight-oriented meshes.
Flexible yet tough. Rolls out, cuts on site, and anchors with sod staples or pins — then mows over like ordinary turf once established.
Available in Standard Duty (SD), Heavy Duty (HD), and Heavy Duty Extra (HDX) with biaxial geogrid backing, so the grade matches the load.
The GREEN alternative to concrete and gravel. Permeable, vegetated, and natural in appearance — supporting your project's environmental goals.
GrassGuard SD® grass reinforcement mesh is a polyethylene mesh installed directly onto surfaces where grass growth needs to be revitalized. It strengthens, protects and stabilizes, allowing water to return naturally to underground aquifers while reinforcing areas sensitive to erosion. Standard duty is the right grade for erosion protection and for light traffic areas such as walkways, bike paths, and handicap access.
Typical erosion protection uses include environmentally sensitive areas, vegetated erosion control, conveyance channels, slope stabilization, streambank and shoreline reinforcement, dam and levee overtopping stabilization, and detention pond emergency outflow weirs.
GrassGuard HD® grass reinforcement mesh is a heavy duty polyethylene mesh installed directly onto existing grass surfaces to reinforce, protect and stabilize. Use GrassGuard HD® in place of concrete and gravel pathways to stay permeable. The use of GrassGuard HD® preserves our natural resources and allows water to return to underground aquifers. Heavy duty is the right grade for heavier traffic areas including parking lots, R.V. parking, access bays, equestrian paths, landing pads, and taxiways.
Typical surface reinforcement uses include grass and overflow parking, pedestrian and bike paths, handicap grass access routes, equestrian surface reinforcement, grass shoulders, motor home access and bays, landing pads and taxiways, recreational areas, vegetated shoreline access, maintenance vehicle access, and canoe and small craft launches.
GrassGuard HDX® grass reinforcement mesh is a heavy duty polyethylene mesh attached to a biaxial geogrid backing. Use GrassGuard HDX® where extra grass reinforcement is necessary, on the heaviest loads and on sites that need the most reinforcement.
GrassGuard HDX® covers the same surface reinforcement uses as GrassGuard HD®, including grass and overflow parking, pedestrian and bike paths, handicap grass access routes, equestrian surface reinforcement, grass shoulders, motor home access and bays, landing pads and taxiways, recreational areas, vegetated shoreline access, maintenance vehicle access, and canoe and small craft launches.
AccessGuard® is a flexible mat providing a reinforced and stable surface for beach access or any event or area on soft sands. Adapting to existing contours and providing a slip-resistant surface in wet conditions, AccessGuard® can be used as a temporary or permanent solution for residential or civil beach access and for beach events.
The oscillating mesh design is manufactured from a UV stabilized polymer and provides a stable surface capable of supporting wheelchairs, strollers, wagons and more, while a heat reduction additive makes it a barefoot-friendly surface. AccessGuard® can easily be cut to be formed around existing obstacles. The attractive design of AccessGuard® is your beach access solution.
GrassGuard® anchoring accessories secure the mesh to the surface. Sod staples are perfect for use in grassy, landscaped, or wooded areas and ship 1,000 or 500 staples per box depending on size, at 60 boxes per pallet. Available sizes are 6" x 1" x 6" in 11 gauge wire, 8" x 1" x 8" (500 per box) in 11 gauge wire, and 8" x 2" x 8" (500 per box) in 11 gauge wire.
Sod pins are perfect for use in grassy, landscaped, wooded or firmer areas. They ship 100 per box and measure 12" with a washer.
One of the most popular applications for GrassGuard® is in areas where parking is needed but the integrity of the grassy area needs to be maintained. After GrassGuard® has been applied and the turf has been allowed to grow and bind with it, the area is reinforced and ready for vehicle traffic. The same reinforcement carries recreational vehicles across grassy roads, parks and bays, allowing traffic and parking in areas previously compromised by load weight and weather, and it stabilizes routes used by maintenance vehicles.
Shoulders and medians benefit for the same reason. With GrassGuard® installed, traffic can access the shoulder or median without worry of getting stranded, and the surface is easily mowed over once established, creating another cost savings and allowing road and highway maintenance to continue as normal. Use GrassGuard® standard duty (SD) where light vehicle traffic is expected, and heavy duty (HD) or heavy duty extra (HDX) where heavier vehicle traffic is possible or where the grassy area needs greater reinforcement.
Creating a usable pedestrian or bike path doesn't have to involve expensive concrete or gravel. If maintaining a natural appearance while stabilizing and reinforcing the path is preferable, GrassGuard® is your best option. The mesh carries foot and bicycle traffic on a surface that stays permeable and green, and it can be mowed as part of normal grounds maintenance once the grass has established.
GrassGuard® also helps you meet the growing demand for handicap access routes while maintaining your green space. The route is stabilized, protecting the surface from the rutting and smearing that would make it inaccessible by pedestrian or wheelchair. Standard duty is generally sufficient for these light-traffic routes.
GrassGuard® has been designed with an oscillated mesh structure to increase traction and improve slip resistance by up to 97% compared to standard straight-oriented meshes, which makes it well suited to surfaces where footing matters. Unlike traditional equestrian surfaces and mats, GrassGuard® is lightweight and easy to install, maintaining a surface's natural appearance while stabilizing and reinforcing areas frequented by equine.
The same design allows you to maintain the integrity of a grass landing pad or taxiway while keeping costs low, because the reinforced surface can be mowed over as part of normal airfield maintenance.
Recreational fields, event lawns and shoreline approaches take concentrated wear in short bursts and then need to recover. GrassGuard® reinforces these areas so they hold up to use while staying vegetated, and the same reinforcement stabilizes vegetated shoreline access routes and canoe and small craft launches, where foot traffic and hull drag would otherwise strip the bank.
Where the surface is sand rather than turf, AccessGuard® provides a reinforced and stable path for residential or civil beach access and for beach events. It adapts to existing contours, stays slip resistant in wet conditions, and its heat reduction additive keeps it barefoot friendly. AccessGuard® can be installed as a temporary or permanent solution and cut to form around existing obstacles.
Applying GrassGuard® for erosion and scour protection is an aesthetically appealing and economical way to replace hard armor erosion control structures, which makes it particularly well suited to environmentally sensitive areas where a hard structure would be the wrong answer both visually and ecologically. On slopes prone to erosion, GrassGuard® interlocks with the vegetation to reinforce the soil against rainfall runoff and surface flow. The result is a stabilized slope that appears as grassed or natively vegetated ground rather than an engineered structure, and it can be mowed once vegetation has established.
Conveyance channels and stormwater pipe outfalls concentrate flow and scour the soil at the point of discharge. GrassGuard® is designed with an open space structure that allows vegetation and grass to grow uniformly through the flow path, so the reinforced channel resists displacement of soil particles by erosive water while remaining a vegetated surface.
Streambanks and shorelines lose material to flow, wave action and fluctuating water levels. GrassGuard® reinforces the bank by interlocking with the natural vegetation of the application area, reducing sediment loss and improving downstream water quality while keeping the bank vegetated and natural in appearance.
GrassGuard® is also used to stabilize dam and levee surfaces against overtopping and to reinforce detention pond emergency outflow weirs, where flow is intermittent but severe when it occurs. The mesh holds the vegetated surface in place through overtopping events and returns to an ordinary grassed appearance between them. Where conditions demand more, GrassGuard® can be used in conjunction with turf reinforcement mats (TRM) or articulated concrete mattresses to further enhance stabilization and reinforcement.
See how this product line is used across roads, slopes, drainage, and site development projects.
Explore Applications